Crestron 3 Series - Specifications

Crestron MC3 3-Series Control System™
Specifications
Specifications for the MC3 are listed in the following table.
MC3 Specifications
SPECIFICATION DETAILS
Operating System
Core 3 OS; real-time, preemptive multi-
threaded/multitasking kernel; Transaction-
Safe Extended FAT file system; supports
up to 10 simultaneously running programs;
SIMPL Windows, SIMPL+
®
,
SystemBuilder™, and D3 Pro
®
programmable
Memory
SDRAM 256 MB
Flash 2 GB (expandable to 1 TB)
Wired Communications
Ethernet
10/100 Mbps, auto-switching, auto-
negotiating, auto-discovery, full/half duplex;
industry-standard TCP/IP stack, UDP/IP,
CIP, DHCP, SSL, IPv4 or IPv6, IIS v.6.0
Web Server, SMTP e-mail client, installer
setup via Crestron Toolbox or MSIE,
supports all Crestron e-Control
®
2, Crestron
Mobile
®
and Fusion RV™ applications
Cresnet Cresnet master mode
USB
Supports USB HID and USB mass storage
class devices via rear panel USB 2.0 host
ports, supports computer console via front
panel USB 2.0 device port
RS-232
Supports 2-way device control and
monitoring up to 115.2 k baud with
hardware and software handshaking
IR/Serial
Supports 1-way device control via infrared
up to 1.2 MHz or serial TTL/RS-232
(0 - 5 Volts) up to 115.2 k baud;
Supports CNXRMIRD IR Receiver
(supplied separately)
Wireless Communications
RF Transceiver
infiNET EX 2-way RF, 2.4 GHz ISM,
Channels 11-26 (2400 to 2483.5 MHz),
default channel 15;
IEEE 802.15.4 compliant
Range (typical)
150 ft (~46 m) indoor, 250 ft (~76 m)
outdoor to nearest mesh network device(s),
subject to site-specific conditions and
individual device capabilities
1
Device Support
Maximum 100 infiNET EX devices
(inclusive of up to 6 MTX-3 and/or MLX-3
remotes, supplied separately) and
5 infiNET EX expanders
(model CLW-EXPEX, supplied separately)
(Continued on following page)
Operations Guide – DOC. 7095D 3-Series Control System™: MC3 • 5