3-Series Control System™ Crestron MC3
“Diagnostics” Screen
The MC3 stores and displays vital system information that can be referred to when
troubleshooting the device or performing diagnostics on the system. Click Show
Message Log to display events that have been stored by the MC3. The Show Last
Reboot Message displays the final message stored before the device was reset.
Press Show Hardware Configuration to display a list of cards in the MC3. Refer to
the following illustration for more details.
“Hardware Configuration” Screen
To navigate through the device list use the Last button to jump to the end of the list,
the First button jumps to the beginning of the list, or the up / down arrows to scroll
through the list.
Press the
icon to return to the previous page.
32 • 3-Series Control System™: MC3 Operations Guide – DOC. 7095D