Crestron AM-3200 - Page 31

Product Manual — Doc. 9020C AirMedia® Series 3 Receivers • 28
l
HTTP Settings
o
HTTP Proxy: Turn on the toggle to allow the device to use an HTTP proxy server.
o
HTTP Proxy Address: Enter the IP address of the HTTP proxy server.
o
HTTP Proxy Port: Enter the port number of the HTTP proxy server.
o
Username: Enter the username required for the HTTP proxy server.
o
Password: Enter the password required for the HTTP proxy server.
l
HTTPS Settings
o
HTTPS Proxy: Turn on the toggle to allow the device to use an HTTPS proxy server.
o
HTTPS Proxy Address: Enter the IP address of the HTTPS proxy server.
o
HTTPS Proxy Port: Enter the port number of the HTTPS proxy server.
o
Username: Enter the username required for the HTTPS proxy server.
o
Password: Enter the password required for the HTTPS proxy server.
Power Settings
Select Power Settings to configure the receiver's power settings.
System Setup - Power Settings
The Power Mode setting allows the receiver to go to sleep based on business hours and/or room
occupancy.
Select a Power Mode option from the dropdown list:
NOTE: Business Hours + Occupancy Based is the default setting.