31 • AirMedia® Series 3 Receivers Product Manual — Doc. 9020C
l
Select Business Hours + Occupancy Based for Signage to apply the following behavior:
o
The display device and the receiver will turn on during business hours and turn off
outside of business hours. Define business hours using the table:
n
Enabled: Turn the toggle on to include the day in the business hours schedule.
n
On Time: Enter the time of day (in 24-hour format) when business hours
begin.
n
Off time: Enter the time of day (in 24-hour format) when business hours end.
NOTE: When the On Time and Off Time settings are set to 00:00 and 23:59
respectively, the display device is on and the receiver is awake all day.
o
The connected occupancy sensor determines when the room is occupied or vacant.
o
If room vacancy is detected during business hours, the receiver goes to sleep. Digital
signage is displayed.
o
If room occupancy is detected during business hours, the receiver wakes up.
o
If room vacancy is detected outside of business hours, the receiver and display
device power off.
o
If room occupancy is detected outside of business hours, the receiver and display
device power on.
o
The touch screen is on when the room is occupied and off when the room is vacant.
o
Crestron Fusion power events are permitted.
o
If an HDMI sync is detected, the receiver wakes up.
o
An AirMedia connection does not wake the receiver.
NOTE: The Business Hours +Occupancy Based With Signage setting must be selected if
Appspace is to be used.
To Next Page
