Product Manual — Doc. 9020C AirMedia® Series 3 Receivers • 30
l
Select Signage Only to apply the following behavior:
o
All user presentation capabilities are disabled.
o
The display device and the receiver will always present digital signage during
business hours and turn off outside of business hours. Define business hours using
the table:
n
Enabled: Turn the toggle on to include the day in the business hours schedule.
n
On Time: Enter the time of day (in 24-hour format) when business hours
begin.
n
Off time: Enter the time of day (in 24-hour format) when business hours end.
NOTE: When the On Time and Off Time settings are set to 00:00 and 23:59
respectively, the display device is on and the receiver is awake all day.
o
The connected occupancy sensor determines when the room is occupied or vacant.
o
If room occupancy is detected outside of business hours, the receiver and display
device power on. Digital signage is displayed.
o
If room vacancy is detected outside of business hours, the receiver and display
device power off.
o
The touch screen is always off.
o
Crestron Fusion power events are permitted.
NOTE: To use the Signage Only power mode, enable the Signage in Standby
setting as described in Digital Signage.
To Next Page
