37 • AirMedia® Series 3 Receivers Product Manual — Doc. 9020C
Services
Select Services to configure the device's connection with Crestron Fusion® software and/or
other calendaring applications.
At the top left corner of the Services window, select the + (plus) icon next to Fusion to configure
the following Crestron Fusion connection settings.
Settings Tab - Services (Fusion)
l
Fusion: Turn the toggle on to use Crestron Fusion with the device.
l
Room Name: Enter the room name to be used by the Crestron Fusion server.
l
Fusion IP ID: Select the IP ID number to be used by the Crestron Fusion server.
l
Report AirMedia Asset Only: Turn the toggle on to allow only AirMedia related settings to
appear in Crestron Fusion. Turn the toggle off to allow all device settings to appear in
Crestron Fusion.
l
Fusion Cloud: Turn the toggle on and enter the Fusion Cloud URL manually in the Fusion
Cloud URL field. When Fusion Cloud is toggled off, the Crestron Fusion server will use
auto-discovery and the Fusion Cloud URL field will not appear.
NOTE: Upon completion, the device will be brought into Crestron Fusion software as a
processor. For more details on using the device with Crestron Fusion, refer to the Crestron
Fusion help file.
To Next Page
Loading...
