DigitalMedia Switchers Product Manual – DOC. 8418A
Enable SSL
An SSL (Secure Sockets Layer) certificate provides secure, encrypted communications
(HTTPS) between a website and a web browser.
SSL is enabled by default (set to Off).
To enable SSL:
1. Select one of the following buttons:
• Self: Generates a self-signed certificate, which provides data encryption
• CA: Allows use of a certificate that is signed by a trusted Certificate
Authority, which provides data encryption and authentication
2. Click the Apply Settings & Reboot button to save the settings and reboot the
system.
A dialog box appears asking for confirmation to reboot the switcher.
Reboot Dialog Box
3. In order for the new setting to take effect, click YES to reboot the switcher.
A message appears indicating that the system is rebooting. When the process is
complete, the Main page opens.
To Next Page
Loading...
