Crestron DM-NVX-D30 Configuration Guide

Web Interface Configuration Guide — Doc. 8874D DM-NVX-D30/E30(C) • 3
1. Open the Crestron Toolbox™ application.
2. From the Tools menu, select Device Discovery Tool. You can also access the Device
Discovery Tool by clicking the Device Discovery Tool button in the Crestron Toolbox
toolbar. The DM-NVX-D30/E30(C) is discovered and is listed in the device list on the left
side of the screen. The associated host name, IP address, and firmware version are also
displayed.
NOTE: If there is security software running on the computer, a security alert might be
displayed when the Crestron Toolbox application attempts to connect to the network.
Make sure to allow the connection, so that the Device Discovery Tool can be used.
3. In the Device Discovery Tool list, double-click your DM-NVX-D30/E30(C) device.
4. Enter your credentials in the Authentication dialog that opens, and then click Log In.
Authentication Dialog Box
5. Click the Web Configuration button in the Configuration page displayed on the left side of
the Device Discovery Tool.

Crestron DM-NVX-D30 Specifications

General

Brand	Crestron
Model	DM-NVX-D30
Category	Media Converter
Language	English