Crestron DM-RMC-100-STR - Configuring Stream Settings

6
•
DM-RMC-100-STR: HD Streaming Receiver Supplemental Guide – DOC. 7846A
o Application Version
o IP ID
o Controller
• Network-related information, which consists of the following:
o Host Name
NOTE:
In the sample Status page shown on the previous page, the
default host name is DM-RMC-100-STR-00107f36fc84, where
00:10:7f:36:fc:84 is the MAC address of the device.
o IP Address
o Subnet Mask
o Default Gateway
o MAC Address
Configuring Stream Settings
To configure stream settings, do the following:
1. In the navigation bar, click
Stream
. The Stream page opens.
Stream Page
2. Configure stream settings. Refer to the following table for stream configuration
guidelines. In addition, refer to the Streaming Design Guide (Doc. 7610) at
www.crestron.com/manuals
for information about DigitalMedia streaming.