Supplemental Guide – DOC. 7846A DM-RMC-100-STR: HD Streaming Receiver
19
To control the display of the LEDs, do the following:
1. In the navigation bar, click
. The Device page, which includes a
section, opens.
2. In the
section of the page, do either of the following:
• To enable the display of the LEDs, click the
radio button if it is not
already selected. By default, the LEDs are enabled.
• To disable the display of the LEDs, click the
radio button.
Although the LEDs become disabled, the DM-RMC-100-STR continues to
function.
To upgrade firmware of the DM-RMC-100-STR, do the following:
1. In the navigation bar, click
. The Device page, which includes a
section, opens.
As shown above, the
section displays the following information about the
DM-RMC-100-STR:
• Model, which is
• Serial Number
• Firmware Version
2. To upgrade the firmware, click the
radio button or the
radio button:
• If the
radio button is selected, do the following:
a. Click the
button.
b. Locate and select the desired firmware file (*.img), and then click
the
button. The
field displays the firmware
filename.
To Next Page
Loading...
