Crestron DM-RMC-100-STR - Configuring HDMI Output Settings

14
•
DM-RMC-100-STR: HD Streaming Receiver Supplemental Guide – DOC. 7846A
Configuring HDMI Output Settings
The HDMI output can be enabled or disabled. In addition, output resolution, underscan
percentage, and timeout settings can be configured. Information about the connected
display device can also be viewed.
To configure HDMI output settings, do the following:
1. In the navigation bar, click
HDMI Output
. The HDMI Output page opens.
HDMI Output Page—Output Settings
2. Enable or disable the HDMI output by selecting the
Enable
or
Disable
radio button,
respectively. By default, the
Enable
radio button is selected, allowing the output
display to be turned on. If the
Disable
radio button is selected, the output display
turns off.
3. In the
Resolution
drop-down list, select the desired resolution of the output display.
The following settings are available:
Auto (Recommended) (Default setting) 1360x768@60Hz
640x480@60Hz 1366x768@60Hz
720x480i@30Hz 1366x768@60Hz Reduced Blanking
720x480@60Hz 1400x1050@60Hz
720x576i@25Hz 1400x1050@60Hz Reduced Blanking
720x576@50Hz 1440x900@60Hz
800x600@60Hz 1440x900@60Hz Reduced Blanking
848x480@60Hz 1600x900@60Hz Reduced Blanking
1024x768@60Hz 1600x1200@60Hz
1280x720@50Hz 1680x1050@60Hz
1280x720@60Hz 1680x1050@60Hz Reduced Blanking
1280x768@60Hz 1920x1080i@25Hz
1280x768@60Hz Reduced Blanking 1920x1080i@30Hz
1280x800@60Hz 1920x1080@24Hz
1280x800@60Hz Reduced Blanking 1920x1080@50Hz
1280x960@60Hz 1920x1080@60Hz
1280x1024@60Hz 1920x1200@60Hz Reduced Blanking
4. In the
Underscan
drop-down list, select the desired underscan percentage.
The underscan percentage reduces the size of the image, resulting in black bars
around the image. Available values are
Custom
,
0.0%
(default setting),
2.5%,
5.0%,
and
7.5%
.