Crestron DM-RMC-100-STR - Logging in to the DM-RMC-100-STR

Supplemental Guide – DOC. 7846A DM-RMC-100-STR: HD Streaming Receiver
•
3
Logging In to the DM-RMC-100-STR
The user name and password dialog box allows login to the DM-RMC-100-STR.
NOTE:
Depending on the web browser being used, the user name and password dialog
box may vary from the dialog box shown below.
User Name and Password Dialog Box
To l
og in to the DM-RMC-100-STR, do the following:
1. Enter the user name and password. The default user name is admin, and the
default password is admin.
NOTE:
The user name and password are case sensitive.
NOTE: For enhanced security, it is recommended that the default user name and
password be changed. For information about changing the user name and
password, refer to “Changing the User Name and Password" on page 18.
2. Click the button that allows login to the DM-RMC-100-STR. If the browser being
u
sed displays the same dialog box as the one shown above, click
Log In
.
The Status page, which is the home page of the user interface, opens.
For information about navigating the user interface, refer to “Navigating the User
Interface” on the following page.