Crestron DM-RMC-100-STR - Changing the User Name and Password; Controlling the Display of the Leds

18
•
DM-RMC-100-STR: HD Streaming Receiver Supplemental Guide – DOC. 7846A
The
Status
field (read only) displays the connection status of the
DM-RMC-100-STR to the control system as
Offline
or
Online
.
Changing the User Name and Password
To change the user name and password, do the following:
1. In the navigation bar, click
Device
. The
Device
page, which includes a
Credentials
section, opens.
Device Page—Credentials
2. In the
Credentials
section of the page, do the following:
NOTE:
The user name and password are case sensitive.
a. In the
Username
text box, enter the desired user name.
b. In the
Password
text box, enter the desired password.
c. In the
Confirm Password
text box, reenter the desired password to
confirm the password.
d. Do either of the following:
• To save the current entries, click the
Save
button. A message
appears, indicating that the credentials were saved successfully.
• To revert to the previous settings without saving the current
entries, click the
Revert
button.
Controlling the Display of the LEDs
The LEDs on the DM-RMC-100-STR can be enabled or disabled
.
NOTE:
When the LEDs are disabled, all LEDs—including the power and Ethernet LEDs—
turn off. The DM-RMC-100-STR appears as though it is not powered on and functioning;
however, the device remains powered on and continues to function.