Crestron DM-RMC-100-STR - Configuring Device Settings; Configuring Control System Connection Settings

Supplemental Guide – DOC. 7846A DM-RMC-100-STR: HD Streaming Receiver
•
17
3. Do either of the following:
• To save the current entries, click the
Save
button. The DM-RMC-100-STR
automatically reboots.
• To revert to the previous settings without saving the current entries, click
the
Revert
button.
Configuring Device Settings
Configuration and management of device settings consist of the following:
• Connecting the DM-RMC-100-STR to a control system
• Changing the user name and password
• Enabling or disabling LEDs on the DM-RMC-100-STR
• Upgrading firmware
• Restoring factory default settings
• Rebooting the DM-RMC-100-STR
Configuring Control System Connection Settings
To connect the DM-RMC-100-STR to a control system, do the following:
1. In the navigation bar, click
Device
. The Device page, which includes a
Control
System Connection
section, opens.
Device Page—Control System Connection
2. In the
Control System Connection
section of the page, do the following:
a. In the
IP Address or Host Name
text box, enter the IP address or host
name of the control system.
b. In the
IP ID
text box, enter the IP ID of the control system. Valid values
range from
03
to
FE
in hexadecimal notation.
c. Do either of the following:
• To save the current entries, click the
Save
button. A message
appears, indicating that the DM-RMC-100-STR will reboot. Click
OK
to reboot the device.
• To revert to the previous settings without saving the current
entries, click the
Revert
button.