Crestron DM-RMC-100-STR - Navigating the User Interface

4
•
DM-RMC-100-STR: HD Streaming Receiver Supplemental Guide – DOC. 7846A
Navigating the User Interface
The user interface provides a navigation bar and built-in web pages of the
DM-RMC-100-STR.
DM-RMC-100-STR User Interface (Status Page Shown)
The navigation bar provides access to the web pages as follows:
• Clicking
Status
accesses the Status page, which provides general information
about the DM-RMC-100-STR as well as network-related information. For additional
information, refer to “
Viewing DM-RMC-100-STR Status Information” on the
following page.
• Clicking
Stream
accesses the Stream page, which allows configuration of the
DM-RMC-100-STR as a streaming decoder. For additional information, refer to
“
Configuring Stream Settings” on page 6.
• Clicking
On-Screen Display
accesses the On-Screen Display page, which allows
text or an image—or both—to be overlaid on the connected display. For additional
information, refer to “
Configuring On-Screen Display Settings” on page 11.
• Clicking
HDMI Output
accesses the HDMI Output page, which allows various
settings, such as the output resolution, to be set. In addition, the output can be
enabled or disabled. For additional information, refer to “
Configuring HDMI Output
Settings” on page 14.
• Clicking
Network
accesses the Network page, which allows network settings such
as host name, domain name, and DHCP (Dynamic Host Configuration Protocol)
mode to be set. For additional information, refer to “
Configuring Network Settings”
on page 16.
• Clicking
Device
accesses the Device page, which sets up connection to a control
system, allows changes to user name and password settings, and controls various
device functions. For additional information, refer to “
Configuring Device Settings”
on page 17.