Crestron TPMC-8X-GA User Manual

Isys
®
8.4” WiFi Touch Screen Crestron TPMC-8X-GA
“Message Configurations Properties” Window (Popup Messages Tab)
To configure the appearance of popup messages, touch the Popup Messages tab.
There are various popup messages. The button associated with each type (Network
and Battery) allows you to set which types are displayed.
There are three types of Network popup messages. Following are definitions of each
message type:
• Connected: A green popup message appears when the touch screen is
connected to the control system.
• Checking Connection: A yellow popup message appears when the touch
screen is experiencing network issues.
• Disconnected, Trying to Reconnect…: A red popup message appears
when the touch screen loses connection with the control system.
There are three types of Battery popup messages. Following are definitions of each
message type:
• Low Battery: A yellow popup message appears when battery is low.
• Very Low Battery: A red popup message appears when battery power is
very low.
• Shutting Down: A red popup message appears when battery power is not
sufficient to supply the touch screen.
A control for popup message Translucence is also provided. Translucence ranges
from 25% to 100%, with a default value of 90%.
The Default button restores the original Screen Position and Translucence settings,
as well as enabling display of Network messages. A Test Message button lets you
see the changes to popup message position and translucence. Touch Close to close
the popup window.
NOTE: The default value for Screen Position is Lower Left.
26 • Isys
®
8.4” WiFi Touch Screen: TPMC-8X-GA Operations Guide – DOC. 7078C

Crestron TPMC-8X-GA Specifications

General

Brand	Crestron
Model	TPMC-8X-GA
Category	Touchscreen
Language	English