Crestron TS-1070 User Manual

Product Manual — Doc. 8555F TS-70 Series • 101
Bluetooth Beacon
Tap BLEBeacon on the Setup screen to display the BLEBeacon screen.
BLEBeacon Screen
Use the BLEBeacon screen to configure the built-in PinPoint™ proximity detection beacon. Using
Bluetooth® technology, the beacon works with the Crestron App or Crestron PinPoint App to
determine when a mobile device is in or near the same room as the beacon, and signals the
mobile app to automatically display the appropriate controls and information for the room.
l
Tap On or Off underneath BLEBeacon to turn the proximity beacon on or off, respectively.
l
Tap On or Off underneath Config Mode to turn configuration mode on or off, respectively.
Turning on configuration mode enables the proximity beacon to be configured.
NOTE:The proximity beacon and configuration mode cannot both be turned on at the same
time.
Tap < BACK to return to the Setup screen.

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE