Crestron TS-1070 User Manual

Product Manual — Doc. 8555F TS-70 Series • 81
Configuration
Prior to configuration, ensure the device is running the latest firmware. To update the firmware,
refer to Update Firmware (on page118).
When power is applied for the first time, the following screen is displayed. The touch screen may
take up to two minutes to boot.
NOTE:TS-70Rseries touch screens boot to the Crestron Home application setup screen. For
more information on configuring the Crestron Home application, refer to the Crestron Home
OS™ Product Manual.
Touch the screen to display the main Setup screen (TS-1070 shown)
Device settings for the touch screen may be configured using the built-in setup screens or the
web configuration interface.
l
To configure the device using the built-in setup screens, refer to Local Configuration (on
page82).
l
To configure the device using the web configuration interface, refer to Web Configuration
(on page116).

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE