Crestron TS-1070 User Manual

Product Manual — Doc. 8555F TS-70 Series • 69
Select an Application
The touch screen ships with various built-in applications. An application may be selected from
the default project that ships with the touch screen.
NOTE:Applications can be selected and configured from the device setup screens or from
the web configuration interface at any time. For more information, refer to Application
Selection (on page154).
To select a touch screen application:
1. Tap Touch Here to Enable a Specific Application on the device splash screen. Refer to the
first image in TS-770 and TS-1070 Installation (on page63).
2. Select the desired touch screen application from the Choose Application Below menu that
is displayed.
3. Select Confirm. The touch screen restarts to display the user interface for the selected
application.
If a custom user project will be used, tap User Project. Custom user projects can be uploaded
using the web configuration interface or Crestron Toolbox software.

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE