Crestron TS-1070 User Manual

140 • TS-70 Series Product Manual — Doc. 8555F
Settings Tab - Control System
If the control system has authentication enabled, its username and password must be entered in
the Security tab. For more information, refer to Security (below).
l
IP Table: Set an IP table connection between the touch screen and control system:
o
IP ID: Enter an IP ID for connecting the touch screen to the control system.
o
IP Address/Hostname: Enter the control system IP address or host name.
o
Room ID: Enter a room ID to associate with the touch screen (for connections with
the Crestron Virtual Control server-based control system)
NOTE: For more information on connecting the touch screen to Crestron Virtual
Control, refer to the help file in the Crestron Virtual Control web configuration
interface. To access the help file, select the question mark button on the top left of
the page.
Security
Select the Security tab on the top left of the configuration interface to display selections for
configuring security and authentication settings for the touch screen.

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE