Crestron TS-1070 User Manual

Product Manual — Doc. 8555F TS-70 Series • 117
l
Security:Used to enable authentication and other security settings
l
802.1x Configuration:Used to configure IEEE 802.1X network authentication for touch
screen security
NOTE: Some device settings may be displayed or hidden depending on the selected
application mode.
If the Crestron room scheduling application is running on the touch screen, the web configuration
utility provides additional configuration options for the room scheduling application. For more
information, refer to the Crestron Room Scheduling Panels Operations Guide.
The Status tab is the default tab that is displayed, as shown in the previous image.
Actions Menu
The configuration interface provides an Actions drop-down menu on the top right of the page.
The Actions menu may be accessed at any time.
Actions Menu
Once any changes have been made to the touch screen configuration, the Actions button
changes to a Save Changes button. SelectSave Changes to save changes to the configuration
settings.
If a restart is required after changes have been saved, a dialog box is displayed asking whether
the restart should be performed. Select Yes to restart the device or No to cancel the restart.
The Actions menu provides the following selections.
Reboot
Select Reboot to restart the touch screen.

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE