Crestron TS-1070 User Manual

138 • TS-70 Series Product Manual — Doc. 8555F
Auto Update
Select Auto Update to configure automatic firmware updates for the touch screen.
NOTE: The Auto Update accordion can be used to configure auto update settings for
firmware only. Automatic application updates are not affected by these settings.
Settings Tab - Auto Update
l
Auto Update: Turn on the toggle to use automatic firmware updates.
l
Custom URL:Turn on the toggle use a custom update server URL. If turned off, the server
URLwill default to the standard Crestron update sever.
l
Custom URL Path: If Custom URLPath is turned on, enter the custom URL path for the
update server.
l
Day of Week: Select the day of week when the touch screen will check for updates. Select
Daily to have the touch screen check for updates every day.
l
Time of Day: Enter a time of day (in 24-hour format) when the touch screen will check
updates on the scheduled day.
l
Poll Interval: Enter the polling interval (in hours) for when the touch screen will poll the
server for updates.
l
Select Update Now to check the update server for new firmware and to update the touch
screen immediately if new firmware is available.
Cloud Settings
Select Cloud Settings to enable or disable a connection between the touch screen and an XiO
Cloud® service account. A connection to the XiO Cloud service is enabled by default.

Crestron TS-1070 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Projective capacitive
Power over Ethernet	Yes
Wi-Fi	Yes
Camera	No
Microphone	Dual, front-facing
Ethernet	10/100/1000 Mbps
Bluetooth	No
Speakers	Yes
Operating System	Android™ 9
Processor	Quad-core
Memory	2 GB RAM
Storage	16 GB Flash
Connectivity	Ethernet, Wi-Fi
Display Size	10.1 inches
Mounting	Wall or Tabletop
Power Supply	PoE