Product Manual — Doc. 8555D TS-770andTS-1070•5
l Tap APPLY CHANGES to apply any new Ethernet settings to the touch screen and to stay
in setup mode.
l Tap REBOOT to exit setup mode and reboot the touch screen.
To change a static IP address, tap Off under DHCP Enable. Then, tap Set Static IP Address
Settings to display the Static IP Ethernet Setup screen.
Static IPEthernetSetupScreen
To edit the static IP address, the static subnet mask, the static default router, the preferred
DNS, or the alternate preferred DNS, tap the text field underneath the setting name.
To Next Page
Loading...
Need help?
General
