Crivit 497633 2204 - Package Contents (Fig. A); Vibration Board Parts List; Remote Control Parts List (Fig. I); Technical Data

75GB
Congratulations!
You have chosen to purchase a high-quality prod-
uct. Familiarise yourself with the product before
using it for the first time.
Read the following operating
instructions carefully.
Use the product only as described and only
for the given areas of application. Store these
operating instructions carefully. When passing the
product on to third parties, please also hand over
all accompanying documents.
Package contents (Fig. A)
1 x vibration board including handles (1)
1 x mat (2)
1 x remote control (3)
1 x case (4)
1 x battery (3V CR2032) (5)
1 x wrist strap (6)
1 x power cable (7)
2 x expansion band (8)
1 x operating instructions
Vibration board parts list
Figure B
• control panel (1a)
• massage balls (1b)
• handles (1c)
• vibration areas (WALKING, JOGGING,
RUNNING) (1d)
Figure C
• feet with suction pads (1e)
• Device plug connection (1f)
• ON/OFF switch (1g)
Vibration board display (Fig. H)
• ‘TIME +’ touch-sensitive button: increase the
workout time
• ‘SPEED +’ touch-sensitive button: increase the
vibration frequency
• ‘START/STOP’
touch-sensitive button:
start/stop workout
• ‘SET’
touch-sensitive button: select a work-
out program or customised mode
• ‘SPEED -’ touch-sensitive button: decrease the
vibration frequency
• ‘TIME -’ touch-sensitive button: reduce the
workout time
Your selection using the remote control or pressing
the touch-sensitive buttons is shown on the display.
Remote control parts list (Fig. I)
• turning the product on/off / starting/stopping
workout (3a)
• ‘SPEED +’ button: increase vibration frequen-
cy/workout time (3b)
• ‘M’ button: customised exercising (3c)
• ‘P’ button: select workout program or standard
mode (3d)
• ‘SPEED -’ button: reduce vibration frequency/
workout time (3e)
Technical data
Mains voltage: 230–240V 50Hz
Power output: 200W
Ambient temperature: +10°C to +40°C
Vibration action:
side-alternating/rocking vibration
Dimensions (L x W x H):
approx. 72.5 x 37.5 x 15cm
Weight: approx. 18kg
Program: 5
Program duration: max. 10 minutes
Manual program duration setting: 1–10 minutes
Vibrations/frequency:
5–16Hz freely adjustable in 20 steps
Amplitude: from the inside out 1–10mm
Remote control power supply:
3V
CR2032
Max. transmission power: 0dBm
Frequency band: 2.4GHz
Hardware version: YT-6907-A03 (2020-05-15)
Software version: YT6912_S102_200430.mot
130
Maximum load: 130kg
DC voltage symbol
AC voltage symbol
08/2022