Croozer Cargo - Attaching and Closing the Cover

17
CroozerCargo14-ENG-2-14
Using your Croozer Cargo
Attaching and closing the cover
The cover protects the cargo items inside the Croozer
Cargo from dust, light rain and inquisitive eyes and keeps
objects from accidently falling out of the Trailer.
1. Pull the cover (1) over the frame. The cover must be posi-
tioned so that the Croozer logos on the left and right sides
are to the rear of the wheel. Otherwise, the buckles won’t
 t together.
2. Insert the two male ends of the buckles (2) on the rear of
the Trailer into the two female ends (3) on the cover.
3. Insert the two male ends of the buckles (4) on the front of
the cover into the female ends (5) on the Trailer.
4. Pull the cover taut by tightening the straps of all four buck-
les.
4
5
1
3
2