EasyManua.ls Logo

Croozer Cargo - Croozer Cargo Storage Tips; Cleaning and Maintaining Parts; General Storage Guidelines

Croozer Cargo
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
CroozerCargo14-ENG-2-14
Cleaning and Storing the Croozer Cargo
Cleaning and Storing the Croozer
Cargo
How do I clean and maintain my Croozer
Cargo?
Fabric body, frame and metal parts
Clean the fabric body, cover and all metal parts with water,
a soap solution or a mild household detergent. Use biode-
gradable cleaning agents whenever possible to minimise
environmental impact. A soft brush can be used to clean
areas of heavy soiling. Clean the mat in the same way as
the fabric body.
Never use solvents, such as mineral spirits, or other ag-
gressive chemicals, as these can damage or destroy the
fabric, the mat or the metal parts. Never use pressure
washers. The force could destroy the fabric or for water
into the wheel bearings, shortening their service life.
To protect metal parts from corrosion, a thin coat of paste
wax can be applied. Preserving metal parts with paste
wax is especially important if you plan to use the Croozer
Cargo often in wet weather, in salty air near the sea or in
the winter.
How do I store my Croozer Cargo?
General information
Store your Croozer Cargo, if possible, in a dry, warm and
well-ventilated area. The minimum storage temperature is
-4°F (-20°C); lower temperatures could cause the fabric to
become brittle.
If you cannot store your Croozer Cargo indoors, then use a
waterproof cover to protect it from the rain.
Avoid long-term exposure to direct sunlight, which will fade
the fabric over time.
If possible, avoid using the Croozer Cargo in salty air, e.g.
near the sea, or during winter months on salted roads, as
the salt can corrode metal parts. To protect metal parts
from corrosion, apply a thin coating of paste wax to all
metal surfaces.

Table of Contents