Croozer Cargo - Croozer Cargo Safety Flag Installation; Installing the Safety Flag

To Next Page

To Previous Page

CroozerCargo14-ENG-2-14

Converting the Croozer Cargo to a Bicycle Trailer

Installing the safety ﬂ ag

Never use your trailer without the safety  ag in place. The

safety  ag makes it easier for other road users to see the

Croozer Cargo, increasing your safety and the safety of

other road users.

For the attachment of the safety  ag, there is a loop (2 or

2a) and a canvas sleeve (3) on the left side of the Croozer

Cargo.

1. Assemble the  ag pole (1) by connecting the two sec-

tions of the pole.

2. Slide the  ag pole through the loop (2) (or 2a when the

cover is not in use) and into the canvas sleeve (3).

When pulling the Croozer Cargo as a Bicycle Trailer, the

safety flag must be properly mounted at all times. If the

safety flag is not properly mounted, other road users may

fail to see the Croozer Cargo, which could result in ac-

cidents with serious injury or death.