Croozer Cargo - Croozer Cargo Initial Assembly; Checking Package Contents

To Next Page

To Previous Page

CroozerCargo14-ENG-2-14

Initial Assembly and Unfolding the Croozer Cargo

Initial Assembly and Unfolding the

Croozer Cargo

If you have purchased the Croozer Cargo from a shop,

the dealer should have installed the axle hitch to the

towing bicycle and sold the vehicle “ready to use”. If you

ordered your Croozer Cargo from an online or mail-order

catalogue, we recommend having the initial assembly

performed by a professional bicycle mechanic. Further-

more, dealers are required to provide the customer with all

important information on the use of the Croozer Cargo. If

the initial assembly has been performed, you can skip the

 rst few steps of this section.

If your Croozer Cargo was not assembled prior to sale,

then have the initial assembly performed by a professional

bicycle mechanic or follow the assembly instructions be-

low. No tools are required for the assembly.

The Croozer Cargo must be properly assembled. Impro-

per assembly can result in accidents with serious injury

or death.

Checking package contents

The Croozer Cargo is packaged in a box for shipment.

In order to minimise package size, the Croozer Cargo is

shipped in its folded state (1). All of the removable parts

are packed inside the Trailer.

1. Take the folded Croozer Cargo out of the box and

remove all packaging materials.

2. Open the cabin and remove all individual parts from

inside the Trailer.

These parts include the wheels (2), hitch arm with axle hitch

(3), handlebar (consists of two parts) (4), Handcart wheel

(5), safety  ag (6), cover (7) and this manual (8).

3. Remove all packaging material from the individual

parts and recycle if possible. It is advisable to keep the

box, e.g. for future storage or transport.

4. Remove all transport restraints on the frame of the

Croozer Cargo.

Unfold the Croozer Cargo completely before installing the

individual parts.