Crosscall Wild - Bluetooth Settings; Tethering & Portable Hotspot; Mobile Networks; Call Settings

-11- Wild user manual _V1.0
available.
 Wi-Fi: Turn the WLAN feature on or off.
 Network notification: Set the device to notify you when an open network is available.
 WPS Connect: connect to a WLAN using a Wi-Fi Protected Setup (WPS) button.
 Select a network from Wi-Fi network list, input password (if necessary). Select
“Connect”.
21.3.3 Bluetooth Settings
Bluetooth is a short-range wireless communications technology for exchanging information
over a distance of about 30 feet. You do not need to line up the devices to send information with
Bluetooth. If the devices are in range, you can exchange information between them, even if they
are in different rooms.
 Bluetooth: Turn the Bluetooth wireless feature on or off.
 Device name: Set a Bluetooth name for your device.
 Discoverable: Set your device to be visible to other Bluetooth devices.
 Scan for devices: Search for available Bluetooth devices. From the list of scanned
devices, touch the target device, enter a PIN for the Bluetooth wireless feature or the
other device’ s Bluetooth PIN, if it has one, select “OK”.
 When the owner of the other device enters the same PIN or accepts the connection,
pairing is complete. If the pairing is successful, the device will automatically search
for available services, send or receive files.
Note: Some devices, especially headsets or heads-free car kits, may have a fixed Bluetooth PIN,
such as 0000.
21.3.4 Tethering & portable hotspot
 USB tethering: Select to active. You can tether your phone to your computer with a
USB cable, to share your phone’s internet connection with your computer.
 Portable Wi-Fi hotspot: You can turn your phone into a portable Wi-Fi hotspot, to
share your phone’s internet connection with one or more computers or other devices.
 Help: Learn more about USB and WLAN tethering.
21.3.5 VPN Settings
Set up and manage Virtual Private Networks (VPNs).
21.3.6 Mobile networks
Show data used in current period, and reset data amount. Set up Access Point Names
(APNs), search for available networks and select a network for roaming.
21.4 Call settings
Set Voicemail, Call forwarding, Call barring, Call waiting, Internet calling, FDN, Minute
REMINDER, Phone settings and Cell broadcast.
21.5 Audio profiles
Select different prompt mode for call, message, notification and feedback in different
environment, and edit the profile. Predefined profiles are: General, Silent, Meeting or Outdoor.