CoCo-80 Quick Reference
57
F2 (Param.)
Analysis Parameters: Displays the analysis
parameters as set in EDM.
Input Channels: Open the channel status screen.
Pressing F1 (Edit Table) will open the sensor table
to view the settings for the enabled input channel.
Settings cannot be changed, only referenced.
Output Channel: Configure and enable the output
channel.
Tacho/RPM: Select the how the RPM data will be
handled. The options are to use a static value
defined in EDM, enter a value manually, or read a
tachometer for a live speed reading.
Display Preferences: Sets the default display values
and types, such as RMS, peak, or peak-peak values
for spectra.
Save Option: Define how the CoCo behaves when a
measurement has been completed.
Auto Save and Entry Auto Advance: automatically
saves the data when a measurement is completed
and advances to next measurement entry. There is
a 5 second delay before each operation to abort
saving or advancing.
Auto Save and Entry Manual Advance:
Automatically save recorded data, but waits for
input to advance to the next entry.
Manual Save: Manually save and advance through
Entries.
Auto Save and Advance and Measure:
Automatically save, advance, and begin measuring
at the next point. The number of entries to advance
through can be set, as well as the delay between
saving, advancing, and beginning the next
measurement.
To Next Page
Loading...
