CoCo-80 Quick Reference
58
F3 (Control)
Hold Live Signals: Pauses data processing for
spectral and block data, and pauses the display.
Review Measured Record: Displays the readings
from previous Entries at this point.
View Point Image Detail: If an image has been
loaded for this Point it will be displayed for
reference.
Prev. Meas. Entry: Will load the previous Entry in
the Route.
Next Meas. Entry: Loads the next Entry in the
Route.
Prev. Point: Loads the previous Point in the Route.
Next Point: Loads the next Point in the Route.
Point Management: Displays the Route structure to
initialize any Entry within the current Route. Entries
that have had data saved since the last upload will
be displayed in red. The Entry that was previously
open will be highlighted in green.
Route Management: Loads the list of available
Routes.
Scanner: Initializes the scanner function to utilize a
barcode scanner to input notes.
Meas. Note: Enter a note with the on screen
keypad to be appended to the Entry data.
F4 (Auto/Zoom)
This soft key manages the scaling of axes on traces. While
in a single trace window, or a two trace window with a
Reading display, pressing F4 (Auto) will toggle the scaling
to manual scaling. The Up and Down buttons will scale
the y-axis, Left and Right will scale the x-axis.
Pressing F4 (Auto) once will change to Zoom mode. To
switch to Move mode, press the Shift button. Use the
arrow buttons to adjust the placement of the display.
To Next Page
Loading...
