CoCo-80 Quick Reference
67
The Display Preferences menu sets the default spectrum
type (RMS, peak, etc), engineering unit (g, m/s, mil, etc.),
axis type (linear, logmag, etc.), and frequency type (Hz,
RPM, etc.).
Figure 68: Display preferences menu
The F3 (Control) has settings to Hold Live Signals, which
pauses the plots, Review Measured Record, make us of a
Scanner, or add a Measurement Note. The Scanner
function uses an optional barcode scanner to
automatically input machine tracking data. Meas. Note
allows for any relevant environmental conditions to be
noted.
To Next Page
Loading...
