CS RV50 - 7 Installation; Base Station Requirements for RV50

RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
10
o EV-DO/CDMA: 800(BC0), 1900(BC1), 1700(BC10)
o GSM/GPRS/EDGE: Quad-band
o Industry Approvals: FCC, IC, PTCRB
o Software defined radio with automatic network operator
switching
o Dual SIM Interfaces
Host Interfaces
• 10/100/1000 Ethernet RJ45
• RS-232 serial port, DB9 female
• USB version 2.0 with micro-B connector
RF Connectors
• 3 SMA antenna connectors (primary, diversity & GPS)
• Active antenna support
Power
• Operating Voltage: 7 to 36 Vdc
• Typical Enable/Ignition Sense Line Low: 1 mA @ 12V
• Typical Idle: 65 to 95 mA @ 12V, depending on configuration
• Typical Active: 250 to 300 mA @ 12V, depending on configuration
Size
• Dimensions: 119 x 34 x 94 mm (4.69 x 1.34 x 3.7 in)
• Weight: 320 g (11.3 oz)
Environmental
• Operating Temperature Range: –30 to 70 °C (–22 to 158 °F)
• Storage Temperature: –40 to 85 °C (–40 to 185 °F)
• Humidity: 90% @ 60 °C
• Military Specification: MIL-STD-810G conformance to shock,
vibration, thermal shock, and humidity
• IP64 rated ingress protection
Industry Certifications
• Safety: IECEE Certification Bodies Scheme (CB Scheme), UL60950
• Vehicle Usage: E-Mark (UN ECE Regulation 10.04), ISO7637-2,
SAE J1455 (Shock & Vibration)
• Hazardous Environments: Class 1 Div 2
• Environmental: RoHS, REACH, WEEE
7. Installation
7.1 Base Station Requirements for RV50
PC running Campbell Scientific’s LoggerNet or PC400 software with access to
the Internet.