www.ctronicssecuritycameras.com
3
complexly set, Greatly facilitate the use of the user
Different angles of infrared right according to the changes of the lens
change times lead to visual Angle on or off in stages, make the IR light
illuminate Angle and lens viewing angles consistent, effectively solve the
ordinary infrared machine due to the small Angle change times high power IR
light in the visual Angle when open comes to the lens "flashlight" phenomenon,
and make the irradiation Angle difference from the viewing Angle of current
camera for the IR light producing periodic rest, reduce the infrared lamp panel
working current, effectively control components of dark current and calorific
value, greatly improved the integration of cameras work environment. Really
improve the machine service life and stability.
Decoder board supply power to motor, camera and IR LED separately,
machine can works more stable.
Using conducting ring, realize continuously rotate for 355° and avoid the
wires twist together.
80 preset positions; 8 tour routes, 1 fixed monitoring position, can set
stay time for each preset positions as 5 / 10 / 15/…/ 55 / 60 seconds, can set
limitation positions on left and right, internal data will not lost after power off.
Angle speed：horizontal 355°Rotation 0.1°- 40°/ sec；vertical 0
～
90°
rotation. 0.1°- 40°/ sec
Ⅲ：Main technical parameters
1、Electricity
Power supply： DC12V—3000mA
To Next Page
Loading...
Need help?
General
