www.ctronicssecuritycameras.com
9
Example：using a type of controlling keyboard to call No.1 preset position.
a、Press the key“ call preset position”， then enter “1”
b、Click‘Enter’
2、
Calling of automatically cruise routes/clear
Auto tour is by operation to set the cruise routes arbitrarily ,an external command
can let the dome camera according to the specified route to make a tour
automatically，and staying in the corresponding preset position。there are 8 auto
cruise routes for the IR dome camera，Each tour lines can store up to 5 presets at
least and 30 presets at most .
（1）Calling auto tour line
By controlling keyboard and DVR to implement the command “call No.98”preset
position. It can make the dome camera auto tour the preset position of it has been set
in the first cruise route “call No.97 preset position” as auto tour the preset position of
the second tour line. Corresponding number of preset position for 3cruise routes, please
reference table 5.
Table 5：cruise and preset relation table
Patrol line Calling preset Contains preset
the first cruise call No.98 preset
1
～
5 preset
the second cruise call No.97 preset
6
～
15 preset
The third cruise call No.96 preset
16
～
35 preset
Note. : The default preset position number corresponding to each patrol
as shown in the table, but the you can be added to each of 30 presets .
Example：Use a type of controlling keyboard to start using the second auto tour line.
a、Press the key “call preset position”, then enter “97”
b、press the key “Enter”
（2）Stay time setting for preset position when auto tour
To Next Page
Loading...
Need help?
General
