20 OPERATING
Engine Inclination
Thisenginewilloperateo_ntlnuoustyatanglesup
to25=inany direction.
Referto the operatinginstructionsofthe equip
ment thisengTnepowers. Becauseof equipment
designor application,theremay be morestringent
restrictionsregardingthe angleofoperation.
CAUTION
Do not operate this e.gine continuouslyat
angles exceeding 2_' in any direction, En-
gine damage could result from insufficient
lubrication.
STOPPING
STOPMNG 21
Stopping the Engine
Ordfmry Stop
• Movethroffie lever{A)toSLOWposition.
• Lowertheenginespeedto an idle.Keeprunning
atidlefor aboutoneminute.
CAUTION
Engine damage can occur from ran-on or
after.burningIf engine is stopped suddenly
from high speed loaded operation. Reduce
enginespeed to Idle for one minute before
shuttingengine off.
• Turntheenginesw#chor_e switchkeyto=OFF"
pos_Eon,
ForControlPanelSwilchType,movethethrottle
leveragainst itslowspeedendtoturnsignitionoff.
Emergency8top
# Immediatelyturnthe engineswitchor theswitch
keyto"OFF"position.
• Closethefuelvalveontheequipment.
ForControlPanel.SwitchType,movethe lhrottle
leveron the equiprne_tagainstitslowspeed end,
Movingthe leveraga'mstilslowspeedendturnsig-
nitionoff,
m_
Always remove Engine Key from switch
when leaving equipment unat_ded or
when equipment is not in use.
42
To Next Page
Loading...
Need help?
General
