Cub Cadet 2146 Parts Manual

-13-
REF.
NO.
PART
NUMBER DESCRIPTION QTY.
1 703-2557 Screen, Intake Dash 1
2 703-3108A Bulkhead, Lower 1
3 710-0751 Screw, Hex Cap, 1/4-20 x .625 2
4 710-0597 Screw, Hex Cap, 1/4-20 x 1.0 4
5 710-3217 Screw, Cross Rec Trus, #8-32 x .38 3
6 712-0142 Nut, #8-32 1
7 712-0397 Nut, Wing w/Bell Washer 1/4-20 2
8 720-3024 Seal, Push On Trim 1
9 723-3042 Bushing, Snap, 7/8 ID 1
10 726-3048 Nut, U-Type Speed, 1/4-20 2
11 726-3054 Nut, U-Clip, 1/4-20 4
12 731-3137A Panel, Dash 1
777I20306 Graphic, Ignition Switch 1
13 731-3161 Knob, Throttle 1
14 723-3317 Boot, Intake 1
15 736-3128 Washer, Flat, .285 x 1.75 x .10 4
16 746-3049 Control, Throttle 1
17 746-3050A Control, Choke 1
18 747-3226 Rod, RH Mounting 1
19 747-3227 Rod, LH Mounting 1
20 777I20312 Label, Dash 1
21 710-0136 Screw, Hex Cap,1/4-20 x 1.75 GR5 1
22 736-0342 Washer, Flat, .283 x .75 x .030 1
23 731-3232 Roller, Hood Latch 1
24 712-0271 Nut, Hex Sems, 1/4-20 1
REF.
NO.
PART
NUMBER DESCRIPTION QTY.
BULKHEAD, DASH PANEL AND ENGINE CONTROLS

Cub Cadet 2146 Specifications

General

Transmission Type	Hydrostatic
Drive	2WD
Front Tires	16 x 6.5-8
Engine Type	4-cycle OHV
Fuel Capacity	11.4 l
Wheelbase	119 cm
Weight	229 kg