5. Bottle holder:
•
The thread sets are provided for attaching
standard bottle holders. The maximum tigh-
tening torque of the screws for attaching the
bottle holder to the frame is 4 Nm.
6. Bicycle rollers
•
The use of bicycle rollers with xed clamps is
not permitted. By rmly restricting the drop-
outs and quick-release hub axles, mechanical
stresses occur which strongly exceed those
permitted for normal cycling operations. This
may result in damage to the bicycle frame.
7. Transport:
•
Due care must be taken when transporting
wheels with carbon frames.
•
The frame should particularly be protected
against contact with other parts using a
cover for example.
•
No carrier or other such systems which use
clamping elements for xing and mounting
may be used. These clamping forces may
lead to damage of the tubes or dropouts.
•
Do not place any objects on the frame.
•
Please ensure that the bicycle is in a xed and
stable position during transport.
5 Bicycle frame /
Bicycle frame set
Risk of Personal Injury and Material
Damage!
An incorrect mounting of the frame may
result in severe injuries caused by falling!
You can purchase some of our bicycle
frames separately and can have them
assembled according to your individual
wishes. Please make sure to consider the
following important notes.
•
The assembly of our frames may only be car-
ried out by specialist dealers that have beeb
authorized by us.
•
The person assembling the frame into a
complete bicycle is considered to be the
manufacturer and is liable for any possible
assembly faults and defects.
•
This Owner’s Manual is not an assembly
instruction for your bicycle frame.
•
Only use trademarked equipment that has
been certied according to EN standards and
is suitable for this frame for the assembly. You
can recognize the right equipment with the
help of the included documentation contai-
ning the following information:
- manufacturer information with complete
address.
- information regarding conducted inspec-
tions and inspection guidelines with EN
number.
- detailed and clear product information and
assembly notes in your national language.
•
If you have questions regarding suitable
accessories, please consult your specialist
dealer.
•
Please consider the information regarding
front forks in chapter 2.1.5
Risk of Personal Injury and Material
Damage!
Only rigid and unsprung front forks that
have been approved by our company
may be built into the frame. Please con-
sult your authorized specialist dealer.
- Racing bike, all models
- Fitness / Urban, all models
- Cyclo-cross, all models
- Trekking with rigid fork geometry,
all models
To Next Page
Loading...
Need help?
General
