Cube MTB User Manual

40 |
MTB/ ROAD BIKE/ TREKKING
MTB/ ROAD BIKE/ TREKKING
8.6.2 SRAM gear shift
On your gear-shift there are two levers.
Lever A is for shifting to a larger chain ring or
sprocket and Lever B for shifting to a smaller
one.
1. Here is how you shift to a larger sprocket:
•
In order to shift you must be pedalling.
•
Press the lever down with your thumb
beyond the rst stop and keep it depressed
until the desired gear is selected.
•
For rapid shifting through several sprockets
press the lever right down and keep it de-
pressed until the desired gear is selected.
2. Here is how you shift to a smaller spro-
cket:
•
In order to shift you must be pedalling.
•
Depress Lever B until you feel it engage and
then let it go again straight away.
8.6.3 Twist grip shift
On your shift grip there is a ring which can
be rotated in either direction. By turning this
ring you shift into the next gear.
Depending on the manufacturer you shift
into a higher or lower gear in the one di-
rection of rotation. You can nd the precise
functioning in the accompanying compo-
nent instructions and/or consult your dealer.
1. Here is how you shift with hub gears:
•
pedalling in order to shift.
•
Turn the rotating ring in the desired direc-
tion until the gear is selected.
2. Here is how you shift with derailleur
gears: to a larger sprocket
•
In order to shift you must be pedalling.
•
Turn the rotating ring until the desired gear
is selected.
•
For rapid shifting over several sprockets turn
the rotating ring until the desired gear is
selected.
3. Here is how you shift to a smaller spro-
cket:
•
In order to shift you must be pedalling.
•
Turn the rotating ring until the desired gear
is selected.
•
For rapid shifting over several sprockets turn
the rotating ring until the desired gear is
selected.
B
A

Cube MTB Specifications

General

Brand	Cube
Model	MTB
Category	Bicycle
Language	English