MTB/ ROAD BIKE/ TREKKING
Problem Possible causes Corrective action
The saddle post slips into
the frame or twists out of
position.
incorrect according
The diameter of the seatpost is
too small
Dismantle and assemble correctly according
to point 11.2
Assemble a seatpost with the correct
diameter
Poor suspension response
Suspension has been set
incorrect
Adjustment according to the accompanying
component operating manual
Poor suspension response
despite being adjusted
correctly
suspension
damaged
Contact a specialist workshop immediately.
Problem Possible causes Corrective action
Noises: Creaking, knocking,
grinding or other.
Splash guard or carrier parts loose Contact a specialist workshop immediately.
Lighting set partly or totally
dysfunctional
Lighting elements („bulbs“)
burnt out
Replace lighting elements. Please consult
your dealer.
Wiring damaged
Contact a specialist workshop immediately.
Dynamo defective
9.4 Splash guard, carrier and lighting set
Risk of Personal Injury and
Material Damage!
Splash guard, carrier and lighting set faults may lead to hazardous riding situations, falling, acci-
dents and material damage.
•
At the slightest malfunction contact your dealer immediately.
•
Only ride the bike again after it has been properly readjusted by the dealer.
To Next Page
Loading...
Need help?
General
