8.6.4
Shimano STI
On your gear-shift there are two levers.
Lever A – this is also the brake lever - is for
shifting to a larger chain ring or sprocket
and Lever B for shifting to a smaller one.
1. Here is how you shift to a larger sprocket:
•
In order to shift you must be pedalling.
•
Press Lever A down with your thumb
beyond the rst stop and keep it depressed
until the desired gear is engaged.
•
For rapid shifting through several sprockets
press Lever A right down and keep it de-
pressed until the desired gear is engaged.
A
B
8.6.5
Sram Force / Rival / Red
On your gear shifter/brake lever you will nd
a lever which can be used to switch to both
a lower and higher gear.
1. In order to switch to a higher gear, please
do the following:
•
To switch gears you must pedal.
•
Press the gear shifter inwards and hold down
until the desired gear has been selected.
•
To switch through several gears, press the
lever down fully and hold down until the
desired gear has been selected.
2. In order to switch to a lower gear, please
do the following:
•
To switch gears you must pedal.
•
Press the lever until you feel it coming to a
stop and then let it go again.
2. Here is how you shift to a smaller spro-
cket:
•
In order to shift you must be pedalling.
•
Depress Lever B until you feel it engage and
then let it go again straight away.
A B
To Next Page
Loading...
Need help?
General
