EasyManua.ls Logo

Cube MTB - Gear System Service

Cube MTB
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
| 37
MTB/ ROAD BIKE/ TREKKING
MTB/ ROAD BIKE/ TREKKING
8.5 Adjust rear suspension
(on full suspension bikes)
1. Please read the instructions for adjus-
ting your suspension/damper elements
in the suspension fork manufacturer‘s
component instructions. Please consult
your dealer.
2. Adjust your suspension/damper element
so that the bike when carrying the rider‘s
weight deects equally at the front and
rear wheels.
8.6 Service the gears
Risk of Personal Injury and Material
Damage!
Incorrect operation of the gear shift
levers can damage your gears.
Never operate both levers or both gear shift
switches at the same time!
Please note that for the crank set (left-hand
lever) and hub gears: Never shift under load!
1. Please determine on the basis of the il-
lustrations, which gear shift system your
bike has. If you are not sure which one it
is please consult your dealer.
2. If your gear shift lever is not shown in
the illustrations please take this from
the accompanying gear shift lever
manufacturer‘s instructions and/or con-
sult your dealer.
Shimano Rapidre 2-Way-Release_Deore
Shimano Rapidre 2-Way-Release_XT
Shimano Dual Control
Twist Grip Shift

Table of Contents

Related product manuals