After inspecting these items, please check o!
Comments:
15 Handover inspection
checklist
Purchaser signature (legal guardian for children under 18 years of age)
Place, date: Retailer signature:
Inspecting the brake
Laying of brake cables/lines
Adjustment of the hand brake lever
Adjustment of the brake pads
Visual tightness test of the hydraulic brake systems
Checking all fastening screws in the brake
system
The functioning and response of the front and
rear wheel brakes
Inspecting the gearshift:
Laying the hub cable and shift cable
Adjustment of the gear lever or gearshifter
Adjustment of the end stops (derailleur/switch-
gear)
Adjustment of the cable tension
Functioning and freedom of movement of the
gearshift
Checking all fastening screws in the
gearshift system
Inspecting the chassis:
Basic functions and tightness of the front fork
Basic functions and tightness of the suspension
strut, adjustment/freedom of movement of the
steering head bearing, checking all fastening
screws of the chassis components
Inspecting all screw connections in the chain-
stays
Inspecting the wheels:
Concentricity and centring of the wheel rims,
concentricity and position of the cover
Testing the spoke tension / air and tyre pressure
Correct installation and xed position of the
wheels
Other inspections:
Adjustment and xed position of the handlebars
and handlebar stem, xed position of the crank
arm an
Adjustment and xed position of the saddle and
seatpost, xed position of the handles
Fixed position of the assembly rivet of the chain
Functioning of lights for TK
Adjustment and xed position of the carrier,
mudguards and kickstands for TK
Assembly and xed position of other attach-
ment parts
When handing over the bicycle:
The purchased object was handed over in a
complete and perfect condition including the
operating manual.
Verbal instructions were given on the safe use of
the bicycle, particularly operating guidelines for
the disc brakes – if applicable.
Reference was made to the respective instruc-
tions in the operating manual which are to be
observed.
Reference was made to the warranty obligations
in the CUBE operating manual.
To Next Page
Loading...
Need help?
General
