MTB/ ROAD BIKE/ TREKKING
Servicing schedule:
Have servicing carried out at intervals prescribed only in a specialist workshop authorised by
the manufacturer.
Nature of inspection Normal use
Frequent sport, competition or use
of a competitive nature
1. Inspection
after 200 km or 2 months whichever
is sooner
after 100 km or 1 month whichever is
sooner
Subsequent inspections every 2000 km or 1 x per annum every 500 km or every 2 months
Check brake pads/brake blocks every 400 km every 100 km
Check brake disks every 400 km every 100 km
Check chain wear every 500 km every 250 km
Check the rear suspension bea-
ring for full-suspension frames
incl. checks/relubricating the
roller bearing on the shock
absorber (if applicable)
Every 500 km or once a year Every 250 km or every two months
Replace handlebars and stem
after a crash (see Chapter 10)
as indicated by component manu-
facturer or every 5 years at the latest
after a crash (see Chapter 10)
as indicated by component manu-fac-
turer or every 2 years at the latest
Under unfavourable conditions your chain can wear rapidly. Changing it early will extend
the life of your sprockets.
To Next Page
Loading...
Need help?
General
