CDR-3250/80 TECHNICAL MANUAL
Issue 2.2 3-49
Most Radio Status Messages use the same format as the
Radio Command Message for that parameter (except for the
X? command.). For example, the reply to the Radio
Command Message "L?" (current Squelch setting) is
"L123" in the same format as the Radio Command Message
to change the Squelch.
All Radio Status Messages (except the reply to the TB?
command) are made up of fixed length strings so that
values may be parsed by counting the characters of the
Status Message. Messages which return a numeric value
will be padded with zeros on the left to give the same
number of characters as the same message with the
maximum value. When more than one parameter is being
reported, the individual parameters are separated by a blank
(space) character.
Courtesy of http://BlackRadios.terryo.org
To Next Page
Loading...