6
OVEN TONE VOLUME
The tone volume can be adjusted only when the time is displayed on the screen.
1. Press AirFry and Dual Cook simultaneously for 3 seconds.
2. The number 1 (default setting) or currently selected setting will display.
3. Use Selector Dial to set preferred tone level: 0 (off/tones deactivated),
1 (low), or 2 (high).
4. Once your selection is displayed, press Selector Dial to confirm.
GENERAL OPERATION
To operate the oven, follow these simple steps:
1. Place the appropriate rack, pan, and/or basket in the position recommended
in the chart on page 7.
2. Use the Selector Dial to scroll through functions.
3. When desired function is flashing, press Selector Dial to confirm. Digital
Display screen will display the last selected or default temperature and time
(shade and slices for Toast and Bagel settings).
4. a. To use displayed settings, press Start/Stop to begin operation.
Start/Stop button will illuminate, indicating the unit is cooking.
b. To change settings:
1. Turn Selector Dial to choose desired temperature (or shade).
2. Press Selector Dial to confirm; time (or slices) will flash.
3. Turn Selector Dial to choose desired time (or slices).
4. Press Selector Dial to confirm.
5. If desired, press Defrost or Fan Speed.
6. Press Start/Stop to begin operation. The button will illuminate,
indicating the unit is cooking.
NOTE: Bake and Pizza have a preheating stage during which display will
show “Preheat”; once preheat is complete, oven will beep and display will
show “Ready”; countdown timer will begin.
5. When countdown timer reaches 0:00, oven will beep three times and heaters
will turn off.
NOTE: Cooking process can be canceled before countdown timer reaches
0:00 by pressing Start/Stop.
NOTE: AFTER COOKING, FAN WILL REMAIN ON FOR COOLING PURPOSES.
TO CHANGE TIME, TEMPERATURE, OR
FUNCTION DURING COOKING CYCLE
To change time: During the cooking cycle, use the Selector Dial to add or decrease
time. The new countdown time will be displayed, and cooking will continue.
To change temperature: During the cooking cycle, press the Selector Dial until
the current temperature flashes. Turn the Selector Dial to desired temperature
and cooking will continue at the new temperature.
To change function: You must press Start/Stop to stop the current
program. Then press and hold the Selector Dial for 2 seconds to return to
Function Selection Menu. Turn the Selector Dial to select another function.
Press Start/Stop again to continue cooking cycle.
To Next Page
Loading...
Need help?
General
