4
INSTALLATION
NOTE: Refer to the manual provided with your filter/RO for installation
instructions specific to that system.
NOTE: Some installations may require adapters and ttings not included with
the product. Review the manual and your installation before beginning.
NOTE: Consult your local plumbing codes and install accordingly.
Turn o cold water shut-o valve then turn on
the kitchen faucet and allow all water to drain
from line.
Disconnect the cold water line from the cold water
shut-o valve.
NOTE: If rigid plumbing pipe (metal or plastic) is
used, you may need to shorten the pipe using a
hacksaw or pipe cutter to accommodate the
control box.
To Next Page
Loading...
Need help?
General
