Culligan MARK 812 User Manual

12 CULLIGAN
®
MARK 89 AND 812 WATER CONDITIONER
REGENERATION FREQUENCY
To set the regeneration frequency, push the number of pins in which corresponds to the number located in Table
2 (refer to Fig. 9 and Table 3).
SOFT-MINDER METERING DEVICE
The Mark 89 and 812 Soft-Minder water conditioners are equipped with water meter which regenerates based
upon the water consumption patterns of the household.
*In household application, not recommended for over 10 people because of pressure drop limitations.
TABLE 2B — CULLIGAN MARK 812 WATER CONDITIONER SALT DOSAGE — FREQUENCY
Water
*Persons Usage
in 0-7 8-14 15-21 22-28 29-35 36-42 43-49 50-56 57-63 64-75 Gal. (Litres)
Household (0-120) (121-240) (241-360) (361-480) (481-600) (601-720) (721-840) (841-960) (961-1080) (1081-1280) per day
12 3 33 3 66
2 150(570)
9768111299
23 3 36 6 66
3 225(850)
6 7 9 13 7 10 11 14
33 6 66 6 66
4 300(1135)
6 8 6 8 11 12 17 20
36 6 66 6 6
5 375(1420)
75710141820
13 36666 6
6 450(1705)
85979131820
23 66666
7 525(1990)
5 6 5 8 12 16 20
23 6666
8 600(2270)
56681320
23 666
9 675(2555)
6861116
23 666
10 750(2840)
7971220
FIG. 9
TABLE 3 — RECHARGE FREQUENCY
No. Down on Pin No. In on Recharge
Salt Chart Frequency Dial Frequency
1 1 Every six days
2 1 & 4 Every three days
3 1, 3 & 5 Every other day
6 All Pins Every day

Culligan MARK 812 Specifications

General

Brand	Culligan
Model	MARK 812
Category	Water Dispenser
Language	English