GB
Customising TV Settings
24
7. When the download is complete, the TV will automatically upgrade the
software.
8. When the update is complete, the TV will return to standby mode.
9. Press the
button on the right side panel of the TV or on the remote
control to switch on the TV.
5. During normal DTV viewing, if the TV detects the latest firmware from the
DTV signal, the Over Air Download screen will appear. Press the
buttons
to select Yes / No for the upgrade procedure.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Software Update (Over Air Download)
The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
2. Press the
buttons to select Software Update(OAD) and then press
the OK button to select On.
3. Press the BACK button to return to the previous menu or press the
MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Signal Information
CI Information
Software Update(OAD)Off
Software Update(USB)
Channel Edit
Yes No
New FW is available for upgrading
TV Version V0.01
Stream Version v0.03
Yes to upgrade.
No to ignore this upgrade.
EXIT
Download
20%
Software Update(OAD)
71%
6. If you select Ye s, the over air download will start. Press the EXIT button if
you want to stop the download and exit the menu.
Software Update (USB)
This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website:
http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday
8am-8pm or Sunday 8am-6pm.
During the download, please do not turn off or unplug your TV.
If you experience difficulties after the software update, we recommend that you restore your TV to the factory default
settings. To do this, follow the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
buttons to select OPTION and then press the OK
button.
2. Press the
buttons to select Restore Factory Default and then press the OK button. Press the button to select
Yes to reset the setting.
3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to
page 16-17 for details).
C16LDIB11_IB_Running Change_120816_Annie.indd 24 12年8月16日 下午1:58
To Next Page
Loading...