CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
RA
•
07/23/2020
•
ECN7288
•
PAGE 1
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
INSTALLATION MANUAL
Tools Required
Ratchet Torque wrench
Socket set Socket extension
Box end wrench set --
* For a tools reference guide visit
curtmfg.com/trailer-hitch-installation
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
The coupler must be rigidly attached to the trailer in order for the
coupler to support its maximum rated load according to SAE J684.
Failure to follow warnings and instructions may result in
property damage, serious bodily injury, and/or death.
Product Photos
Parts List
Item Qty Description
1 1 Trailer coupler
2 4 * Hex bolt, 1/2", grade 5
3 4 * Nylock nut, 1/2", grade 5
* Recommended hardware, not included
Weight Carrying Capacity
Gross trailer weight (GTW) 3,500 lbs.
Tongue weight (TW) 350 lbs.
Torque Specifications
1/2" bolt 55 ft-lbs.
Use above torque setting unless otherwise noted
#25470
(2" channel)
#25472
(3" channel)
#25471
(2-1/2" channel)
To Next Page
Need help?
General
